Service Name: xbox_80, Service Type: TCP, Starting Port : 80, Server IP address: (the IP address you reserved for the router), click Apply.Service Name: xbox_53, Service Type: TCP/UDP, Starting Port : 53, Server IP address: (the IP address you reserved for the router), click Apply.Service Name: xbox_3074, Service Type: TCP/UDP, Starting Port : 3074, Server IP address: (the IP address you reserved for the router), click Apply.Service Name: xbox_88, Service Type: UDP, Starting Port : 88, Server IP address: (the IP address you reserved for the router), click Apply.Under Ports – Custom Service, add the following information into the Service Name, Service Type, Starting Port, and Server IP Address fields for each port individually:. ![]() FILTERING MAC ADDRESS XBOX ONE MANUALIf the modem router you are using is not a NETGEAR modem router, refer to your specific modem router user manual for help in locating the Port Forwarding / Port Triggering option. To add port numbers to the port forwarding service of your modem router, click ADVANCED > Advanced Setup > Port Forwarding / Port Triggering > Add Custom Service.If the modem router you are using is not a NETGEAR modem router, refer to your specific modem router user manual for help in locating the UPnP option. Clear the check mark from the Turn UPnP On check box and click Apply. To do this on a NETGEAR modem router, click ADVANCED > ADVANCED Setup > UPnP. You will now disable UPnP on your modem router.Enter the IP Address, MAC Address, and Device Name.If the modem router you are using is not a NETGEAR modem router, refer to your specific modem router user manual for help in locating the Address Reservation table. For NETGEAR modem routers, click ADVANCED > Setup > LAN Setup > Add. You will now need to log into your modem router. Add the router MAC address you noted in the previous step into the Address Reservation table of your modem router.If the router you are using is not a NETGEAR router, refer to your specific router user manual for help in locating the MAC Address. If you are using a NETGEAR router, log into the router Write down the MAC address listed under the Internet Port menu. Log into your router to obtain the MAC address of your router.To properly configure your system and eliminate the error message: Router (ex: Nighthawk R7000) is set to regular router mode and gets an IP address from the modem router.The D7000 is a modem with router functions and is NOT set to bridge mode. Modem router (ex: D7000) refers to the router connected directly to the internet via cable, DSL, etc. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |